14 / 14
[23] Kalpin Yu.G., Perfilov V.I., Petrov P.A., Ryabov V.A., Filippov Yu.K. Soprotivlenie
deformatsii i plastichnost metallov pri obrabotke davleniem [Resistance to
deformation and plasticity of metals treated by pressure], Moscow, Maschinostroenie
Publ., 2011, 244 p.
[24] Thompson M.K., Thompson J.M. Considerations for the Incorporation of Measured
Surfaces in Finite Element Models.
Scanning
, 2010, vol. 32, no. 4, pp. 183–198.
DOI: 10.1002/sca.20180
[25] Kwon O.H., Thompson M.K. The effect of surface smoothing and mesh density
for single asperity contact.
Proceedings of the International Conference on Surface
Metrology
, Worcester, MA, 2009. 5 p.
[26] Kwon O.H. Investigation on the effect of mesh density and surface smoothing for
real rough surfaces in contact. M.S. Thesis, Korea Advanced Institute of Science and
Technology, Department of Civil and Environmental Engineering, 2009. 93 p.
[27] Dimitri R., De Lorenzis L., Scott M.A., Wriggers P., Taylor R.L., Zavarise G.
Isogeometric large deformation frictionless contact using T-splines.
Computer
Methods in Applied Mechanics and Engineering
, 2014, vol. 269, pp. 394–414.
DOI:10.1016/j.cma.2013.11.002
[28] Wang E., Nelson Th., Rauch R. Back to Elements — Tetrahedra vs. Hexahedra.
International ANSYS Conference
, Pittsburg, PA, May 24–26, 2004. 16 p.
[29] Panin S.D., Astrahov A.V., Murashov M.V. The features of solving an axisymmetric
nonlinear nonstationary heat conduction problem with moving boundary using finite
element method.
Izv. Vyssh. Uchebn. Zaved., Mashinostr
. [Proceedings of Higher
Educational Institutions. Machine Building], 2003, no. 6, pp. 9–16 (in Russ.).
Статья поступила в редакцию 08.06.2015
Мурашов Михаил Владимирович — канд. техн. наук, доцент кафедры “Защита ин-
формации” МГТУ им. Н.Э. Баумана.
МГТУ им. Н.Э. Баумана, Российская Федерация, 105005, Москва, 2-я Бауманская ул.,
д. 5.
Murashov M.V. — Cand. Sci. (Eng.), Assoc. Professor of Information Security department,
Bauman Moscow State Technical University.
Bauman Moscow State Technical University, 2-ya Baumanskaya ul. 5, Moscow, 105005
Russian Federation.
Панин Сергей Дмитриевич (1945–2015) — д-р техн. наук, профессор, работал на
кафедре “Защита информации” МГТУ им. Н.Э. Баумана.
МГТУ им. Н.Э. Баумана, Российская Федерация, 105005, Москва, 2-я Бауманская ул.,
д. 5.
Panin S.D. (1945—2015) — Dr. Sci. (Eng.), Professor, worked at Information Security
department, Bauman Moscow State Technical University.
Bauman Moscow State Technical University, 2-ya Baumanskaya ul. 5, Moscow, 105005
Russian Federation.
Просьба ссылаться на эту статью следующим образом:
Мурашов М.В., Панин С.Д. Особенности численного решения задачи контактного
деформирования шероховатых тел в ANSYS // Вестник МГТУ им. Н.Э. Баумана. Сер.
Приборостроение. 2016. № 1. C. 129–142. DOI: 10.18698/0236-3933-2016-1-129-142
Please cite this article in English as:
Murashov M.V., Panin S.D. Numerical solution features for contact deformation
problem of rough bodies in ANSYS.
Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana,
Priborostr.
[Herald of the Bauman Moscow State Tech. Univ., Instrum. Eng.], 2016, no. 1,
pp. 129–142. DOI: 10.18698/0236-3933-2016-1-129-142
142 ISSN 0236-3933. Вестник МГТУ им. Н.Э. Баумана. Сер. “Приборостроение”. 2016. № 1