[5] Zarubin V.S., Kuvyrkin G.N., Savelyeva
I.Yu. Mechanical analog modeling of the
inelastic non-isothermal deformation processes.
Matematicheskoe modelirovanie i
chislennye metody
[Mathematical modeling and Numerical Methods], 2014, no. 3,
pp. 25–38 (in Russ.).
[6] Ott L. Untersuchungen zur Frage der Erw¨armung elektrischer Maschinen.
Mitteilungen ¨uber Forschungsarbeiten auf dem Gebiete des Ingenieurwesens,
insbedere aus den Laboratorien der technischen Hochschulen
. Berlin, Springer, 1906.
H. 35–36, ss. 53–107.
[7] Barratt T. Thermal and electrical conductivities of some of the rarer metals and
alloys.
The Physical Society of London Proceedings
, 1914, vol. 26, part 5, pp. 346–
371. DOI: 10.1088/1478-7814/26/1/335
[8] Barratt T. The magnitude of the thermal resistance introduced at the slightly conical
junction of two solids, and its variation with the nature of the surfaces in contact.
The Physical Society of London Proceedings
, 1915, vol. 28, pp. 14–20.
DOI: 10.1088/1478-7814/28/1/302
[9] Thompson M.K. A Multi-Scale Iterative Approach for Finite Element Modelling
of Thermal Contact Resistance: PhD. thesis, Cambridge, MA, USA, Massachusetts
Institute of Technology, 2007. 100 p.
[10] Lee S., Jang Y.H., Kim W. Effects of nanosized contact spots on thermal contact
resistance.
Journal of Applied Physics
, 2008, vol. 103. 074308. 8 p.
DOI: 10.1063/1.2903450
[11] Ciavarella M., Delfine V., Demelio G. A “re-vitalized” Greenwood and Williamson
model of elastic contact between fractal surfaces.
Journal of the Mechanics and
Physics of Solids
, 2006, vol. 54, iss. 12, pp. 2569–2591.
DOI: 10.1016/j.jmps.2006.05.006
[12] Bahrami M., Yovanovich M. M., Culham J.R. Thermal contact resistance at low
contact pressure: Effect of elastic deformation.
Int. J. Heat Mass Transfer
., 2005,
vol. 48, iss. 16, pp. 3284–3293. DOI: 10.1016/j.ijheatmasstransfer.2005.02.033
[13] Murashov M.V., Panin S.D. Modelling of thermal contact resistance.
Tr. pyatoy Ross.
nacionalnoy konf. po teploobmenu
[Proc. of the fifth Russian national conference on
heat transfer]. Moscow, MEI Publ., 2010, vol. 7, pp. 142–145 (in Russ.).
[14] Yovanovich M.M. Four Decades of Research on Thermal Contact, Gap, and Joint
Resistance in Microelectronics.
IEEE Transactions on Components and Packaging
Technologies
, 2005, vol. 28, no. 2, pp. 182–206. DOI: 10.1109/TCAPT.2005.848483
[15] Greenwood J.A., Williamson J.B.P. Contact of nominally flat surfaces.
Proceedings
of the Royal Society of London. Series A, Mathematical and Physical Sciences
, 1966,
vol. 295, pp. 300–319. DOI: 10.1098/rspa.1966.0242
[16] Demkin N.B. Fakticheskaya ploshad kasaniya tverdih poverhnostey [Real contact
area of hard surfaces], Moscow, AN SSSR Publ., 1962, 111 p.
[17] Kragelskiy I.V. Trenie i iznos [Friction and wear], Moscow, Mashgiz Publ., 1962,
383 p.
[18] Pei L., Hyun S., Molinari J.F., Robbins M.O. Finite element modeling of elasto-
plastic contact between rough surfaces.
Journal of the Mechanics and Physics of
Solids
, 2005, vol. 53, pp. 2385–2409. DOI:10.1016/j.jmps.2005.06.008
[19] Murashov M.V., Panin S.D. Material micromechnics: the prosesses on rough surfaces,
Teplovie processi v tehnike
[Thermal Processes in Engineering], 2010, no. 4, pp. 164–
168 (in Russ.).
[20] Murashov M.V., Panin S.D. Modeling of thermal contact conductance.
Proceedings of
the International heat transfer conference IHTC14
, August 8–13, 2010, Washington,
DC, USA, vol. 6, pp. 387–392. DOI: 10.1115/IHTC14-22616
[21] Wang L., Liu H., Zhang J., Zhao W. Analysis and modeling for flexible joint interfaces
under micro and macro scale.
Precision Engineering
, 2013, vol. 37, iss. 4, pp. 817–
824. DOI: 10.1016/j.precisioneng.2013.03.008
[22] Yan W., Komvopoulos K. Contact analysis of elastic-plastic fractal surfaces.
Journal
of Applied Physics
, 1998, vol. 84, pp. 3617–3624. DOI: 10.1063/1.368536
ISSN 0236-3933. Вестник МГТУ им. Н.Э. Баумана. Сер. “Приборостроение”. 2016. № 1 141