Interferometric Method to Control the Convex Aspherical Surface Shape using a Concentric Meniscus Lens
Authors: Nguyen X.C., Druzhin V.V. | Published: 25.06.2023 |
Published in issue: #2(143)/2023 | |
DOI: 10.18698/0236-3933-2023-2-4-19 | |
Category: Instrument Engineering, Metrology, Information-Measuring Instruments and Systems | Chapter: Information-Measuring and Control Systems | |
Keywords: spherical mirrors, convex aspherical surfaces, optical measurements, optical control, interferometers |
Abstract
Convex aspherical surfaces are being increasingly used as elements of the high-precision optical devices for various purposes. Complexity in such surfaces manufacture is because the existing methods of their shape control with the optical accuracy of about 20--30 nm require introduction of the auxiliary reference optical elements, which dimensions are several times larger than those of the controlled part are. The paper proposes the autocollimation control method using a concentric meniscus lens with dimensions slightly exceeding the dimensions of the controlled part. Results of calculating the control circuit design parameters are presented based on the theory of the third-order aberrations. Effect of the refractive index and thickness of a concentric meniscus lens on the maximum and root-mean-square deviations of the surface shape with various requirements to concentric meniscus lens radii was considered, and the developed scheme simulation in the Zemax soft-ware was also proposed. The Fizeau interferometer optical scheme was described using a lens with the reference surface to implement the developed method. Applied research was carried out to control the secondary mirrors of the Ritchie --- Chretien telescope at the Hoa Lak Observatory (Vietnam) and of the SNAP satellite telescope
Please cite this article in English as:
Nguyen X.C., Druzhin V.V. Interferometric method to control the convex aspherical surface shape using a concentric meniscus lens. Herald of the Bauman Moscow State Technical University, Series Instrument Engineering, 2023, no. 2 (143), pp. 4--19 (in Russ.). DOI: https://doi.org/10.18698/0236-3933-2023-2-4-19
References
[1] Puryaev D.T., Druzhin V.V., Abdulkadyrov M.A., et al. Compact laser interferometer for optical measurements in visible and infrared (IR) spectrum range. Kontenant [Contenant], 2020, vol. 19, no. 2, pp. 1--5 (in Russ.).
[2] Puryaev D.T. Metody kontrolya opticheskikh asfericheskikh poverkhnostey [Methods for control of optical aspherical surfaces]. Moscow, Mashinostroenie Publ., 1976.
[3] Malacara D. Optical shop testing. New York, John Wiley & Sons, 2007.
[4] Semenov A.P., Patrikeev V.E., Puryaev D.T., et al. Interferometer for control of convex hyperboloids. Kontenant [Contenant], 2018, vol. 17, no. 2, pp. 89--93 (in Russ.).
[5] Puryaev D.T., Druzhin V.V., Semenov A.P., et al. Interferometer for convex hyperboloid testing. Kontenant [Contenant], 2020, vol. 19, no. 2, pp. 6--11 (in Russ.).
[6] Poleshchuk A.G. Formation of aspherical wavefronts by means of computer generated holograms. Interekspo Geo-Sibir, 2013, vol. 5, no. 3, pp. 11--14 (in Russ.).
[7] Percino-Zacarias M.E., Cordero-Da’vila A. N-Hindle-sphere arrangement with an exact ray trace for testing hyperboloid convex mirrors. Appl. Opt., 1999, vol. 38, no. 28, pp. 6050--6054. DOI: https://doi.org/10.1364/AO.38.006050
[8] Druzhin V., Puryaev D., Semenov A., et al. Interferometer for surface figure of large convex hyperboloid mirrors. Proc. SPIE, 2020, vol. 11451, art. 114510V. DOI: https://doi.org/10.1117/12.2560364
[9] Poleshchuk A.G., Khomutov V.N., Matochkin A.E., et al. Laser interferometers for optical surface testing. Fotonika [Photonics Russia], 2016, no. 4, pp. 38--50 (in Russ.).DOI: https://doi.org/10.22184/1993-7296.2016.58.4.38.50
[10] Qi L., Zheng L., Ye L., et al. Convex aspheric surface testing method using an autocollimation lens. Acta Optica Sinica, 2020, vol. 40, no. 8, art. 0822001. DOI: https://doi.org/10.3788/aos202040.0822001
[11] Ye X., Han C., Han S., et al. Intelligent selection of industrial transmission sphere for interferometer. Proc. IEEE ITOEC, 2017, pp. 86--90. DOI: https://doi.org/10.1109/ITOEC.2017.8122385
[12] Thao N.T., Dung M.T., Loc P.V., et al. The 50 cm telescope of Hoa Lac observatory: an introduction. VJSTE, 2019, vol. 61, no. 4, pp. 14--28. DOI: https://doi.org/10.31276/VJSTE.61(4).14-28
[13] Michael L.L., Carl W.A., Greg A., et al. SNAP telescope. Proc. SPIE, 2002, vol. 4849. DOI: https://doi.org/10.1117/12.460074
[14] MLOPTIC transmission spheres. mloptic.com: website. Available at: https://mloptic.com/wp-content/uploads/2022/01/Transmission-Spheres.pdf (accessed: 15.06.2022).
[15] Metrology for optics redefined. yuanch.com: website. Available at: http://www.yuanch.com/pdf/19_XO-Catalogue_2020N_S.pdf (accessed: 15.06.2022).